iSys V24 Direct Thermal Printer - Manual (Page 4)

4
Unpacking
WARNING: The V24 plotter weighs approximately 60 lbs. Use appropriate care when
unpacking, lifting or moving the unit.
Shipments are checked for completeness. Please confirm receipt of the following items:
• Power Cord – 110/120 volt AC
• Warranty Statement
• Media Spindles
• Sample Media Roll
• Print Head Cleaning Pen
• CD (Includes Product Manual and Drivers)
NOTE: Confirm the receipt of options specified in your order.
NOTE: Inspect the shipment for any concealed damage that may have occurred during
shipment. Report any damage to the carrier of the shipment and the iSys Technical
Support team immediately. While iSys assumes no liability for “in transit” damage, we
will assist in damage claims with carriers.
NOTE: Save the original packaging materials. Any future shipment should be made in
the original packaging. iSys is not responsible for damage caused in any future shipping
due to improper packaging.
CAUTION: During shipment, storage or long idle periods, place a length of thermal
media between the print head and platen roller to prevent possible damage to the print
head.
CAUTION: If plotter is idle for more than 8 hours, release head pressure to prevent
platen roller flat spotting.
CAUTION: The electronic components of the V24 plotter can be damaged by
electrostatic discharge (ESD). To avoid ESD, maintain contact with a ground source. A
grounded wrist strap or similar should be used.