Irritrol IBOC-Plus User Manual
Page 9
7
DISPLAY LANGUAGE OPTION
Use this feature to select either Spanish or English display prompts.
By default, English display prompts will be shown.
To change the display language:
1. Ensure the function dial is in the
OPTIONS
position.
2. Press the
NEXT
button to display “Language”.
3. Press the + /
ON
button to select the desired language.
4. Return the function dial to the
AUTO RUN
position if finished or press
the next button to continue.
RAIN SENSOR OPERATION
Use this feature to enable/disable rain sensor operation mode for each
program.
Important: A rain sensor device must be properly connected to the
controller Rain Sensor terminals before sensor operation is enabled
for an automatic watering program. If a rain sensor is not installed
and the rain sensor operation is enabled, automatic watering for the
program will NOT occur. By default, rain sensor operation is
disabled for all programs.
To select the rain sensor mode:
1. Ensure the function dial is in the
OPTIONS
position.
2. Press the
NEXT
button as required to display “Rain Sensor.”
3. Select the program by pressing Program button
A
,
B
or
C
.
4. Press the + /
ON
button to enable or –/
OFF
button to disable sensor
operation for the selected program.
5. Repeat steps 3 and 4 as required to set rain sensor operation for
additional programs.
6. Return the function dial to the
AUTO RUN
position when finished.
Programming the Controller