iHealth Align - Manual

Align Gluco-Monitoring System (BG1)
Quick Start Guide
EN
Welcome to your iHealth Align Gluco-Monitoring System (the iHealth system). The iHealth system is
designed to be used with the free iHealth Gluco-Smart App (the App) and will help you manage your
diabetes.
WELCOME
The iHealth system is compatible with select iOS and Android devices. For a complete list of
compatible devices, visit our support page on www.ihealthlabs.com.
COMPATIBILITY
3. Insert the new battery with the “+” side facing up and snap it into the battery tray.
4. Press the back panel back in place by inserting the front clip into place and snapping the back of
the cover down.
INSTALL THE BATTERY
Your meter comes with two 3V CR1620 lithium battery. The battery lasts up to six months depending
on the usage. Follow the instructions below to replace the battery.
1. Turn the meter over with the iHealth logo facing down.
2. Lift off the back cover by pulling firmly from the notch next to the test strip port.