beautypg.com

iHealth Wireless Blood Pressure Monitor User Manual

Page 7

background image

7

measurement

8. Memory volume: 120 times with time and date stamp (off-line

measurement only)

9. Power: DC: 5.0V

1.0A, Battery: 1*3.7V

Li-ion 400mAh

10. Measurement range:

Cuff pressure: 0-300 mmHg
Systolic: 60-260 mmHg
Diastolic: 40-199 mmHg
Pulse rate: 40-180 beats/minute

11. Accuracy:

Pressure: ±3 mmHg
Pulse rate: ±5%

12. Wireless communication:

Bluetooth

V3.0 + EDR Class 2 SPP

Frequency Band: 2.402-2.480 GHz

13. Environmental temperature for operation:

5℃~40℃(41℉~104℉)

14. Environmental humidity for operation: ≤90%RH
15. Environmental temperature for storage and transport:

-20℃~

55℃(-4℉~131℉)

16. Environmental humidity for storage and transport: ≤90%RH
17. Environmental pressure: 80kPa-105kPa
18. Battery life: more than 80 measurements on a full charge
19. The blood pressure measurement system includes accessories: pump,

valve, cuff, and sensor.

Note: These specifications are subject to change without notice.

GENERAL SAFETY AND PRECAUTIONS

1. Read all of the information in the Owner’s Manual and other provided

instructions before operating the unit.

2. Consult your physician for any of the following situations:

a)The application of the cuff over a wound or inflamed area.
b)The application of the cuff on any limb with intravascular access

or therapy, or an arterio-venous (A-V) shunt.

c)The application of the cuff on the arm on the side of a mastectomy.
d)Simultaneous use with other medical monitoring equipment on the

same limb.

e)The blood circulation of the user needs to be checked.

3. Do not use this product in a moving vehicle as this may result in

inaccurate measurements.

4. Blood pressure measurements determined by this product are

equivalent to those obtained by professional healthcare
practitioners using the cuff/stethoscope auscultation method within
the limits prescribed by the American National Standard, Electronic
or Automated Sphygmomanometer.

5. When a call comes in during the measurement, the measurement process

will be terminated automatically. It is recommended that the iOS

This manual is related to the following products: