H3C Technologies H3C Intelligent Management Center - Manual (Page 90)

81
• Some versions of Windows operating system do not provide any telnet
client by default.
• Some versions of IE are not allowed to employ any telnet client by default.
For more information, see FAQ of the IMC online help.
I failed to open the Web-based NMS interface for some devices. Why
did this happen?
The Web-based NMS function is subject to the device configuration. This
function is available only when Web-based network management is
supported and enabled on your selected device.
I failed to view the topology after IMC had run for some time. Why did
this happen?
This is because that there are too many temporary files in the Temp folder
of the system. Clear unnecessary files from the folder to release space.
The default path of the Temp folder varies with the operating system.
• On Windows XP, the folder is located in the C:\Documents and
Settings\ADM\Local Settings\Temp directory.
• On Windows 7 and 8, the folder is located in the
C:\Users\ADM\AppData\Local\Temp directory.
Replace ADM with the current user name of the operating system.
When a device is replaced with another device using a different IP
address, the network topology becomes incorrect. What shall I do?
The network topology is incorrect because IMC is unaware of the device
change. To solve the problem, use any of the following methods:
• Remove the old device from IMC and manually synchronize the new
device to IMC.
• Configure the IP address of the new device with that of the old device,
and manually synchronize the new device to IMC