ARM Electronics MP13DVPDN - Manual (Page 32)

31
Get IP address automatically (DHCP)
The camera’s default setting is “Use fixed IP address”. Please refer to the
previous section Chapter 6. Accessing Camera for logging in with the default IP
address.
If select “Get IP address automatically”, after the IP Dome Camera restarts,
users can search it through the installer program: DeviceSearch.exe, which can
be found in “DeviceSearch” folder in the supplied CD.
NOTE: Please make the record of the IP Dome Camera’s MAC address,
which can be found in the label of the camera, for identification in the
future.
Use fixed IP address
To setup static IP address, select “Use fixed IP address” and move the cursor
to the IP address blank (as indicated below) and insert the new IP address, ex.
192.168.7.234; then go to the Default gateway (explained latter) blank and
change the setting, ex. 192.168.7.254. Press “Save” to confirm the new setting.