Sundance SMT317 - Manual (Page 19)

Version 6.1 Page 19 of 24 SMT317 User Manual
16. Jumpers
JMP1 is a header located to the left of the JTAG pins,
JMP2 is a header to the right, closer to the TIM connector.
The Jumpers JPx are numbered from the left to the right: JP1, JP2, JP3 for each
connector JMPx
JP1, JP2 and JP3 refer to the following link positions on JMPx:
JP1 JP2 JP3
Figure 6: JUMPER JMPx
16.1. JMP1: Control Comm-port Select
JP1 JP2 JP3 Comm Port
OUT OUT OUT N/A
OUT OUT IN N/A
OUT IN OUT N/A
OUT IN IN 3
IN OUT OUT N/A
IN OUT IN N/A
Table 2: Comm-port selection