Directed Electronics ESP 540 - Manual (Page 17)

16
© 1999 Directed Electronics, Inc.
will turn off. You can also shut down the remote start system by
pressing on the brake pedal. You may want to enter the vehicle and
drive it without shutting off the motor. It is possible to shut down the
remote start and drive the vehicle without shutting down the motor.
To shut down the remote start:
1. Disarm the security system (if
armed) by pressing .
2. Enter the vehicle and turn the
ignition to the ON position.
3. Step on the brake pedal.
The remote start system will be shut down when you step on the
brake pedal. The vehicle motor, however, will continue to run
because the ignition has been turned on. The vehicle will now
operate as usual.
A vehicle equipped with the Valet ® Take-Over system can remain
running after the key is removed from the ignition. This feature is
useful for occasions when you wish to exit the vehicle for short
periods of time, but would like to leave the motor running and the
climate controls on.
To perform Valet ® Take-Over, before turning off the engine:
1. Press and release and on the transmitter (or press
and release the optional Momentary switch).
2. Turn the ignition key to the OFF position. (The engine will
stay running.)
Valet Take-Over