Directed Electronics ESP 540 - Manual (Page 15)

14
© 1999 Directed Electronics, Inc.
To enter or exit Valet ® Mode:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet ®
switch within 10 seconds.
The status LED will light steadily to indicate that you have entered
Valet ® Mode and will turn off when you have exited Valet ® Mode.
You can also activate Valet ® Mode using the remote transmitter:
1. Open any vehicle door.
2. Press .
3. Press .
4. Press again.
The status LED will light solid if you are entering Valet ® Mode and
will turn off if you are exiting Valet ® Mode.
The remote start feature allows you to remotely start and run your
vehicle for a programmable period of time. This makes it possible
to warm up the engine, as well as adjust the interior temperature
of the vehicle with the climate control system. If interior heating
or cooling is desired, the climate controls must be preset, and the
fan blower must be set to the desired level prior to remote starting
the vehicle.
Remote Start
Remote Valet
DRW-35