MMD Equipment 45S-6A6 - Manual (Page 44)

5. Periodic Inspection/Maintenance
5-3
5.3 Periodic Inspection List
Such items marked
○
shall be carried out by customers.
For the following items or clauses marked ●, contact us directly or our distributors because they
require expert technical knowledge on them.
◎
Refer to engine operation manual for inspection and maintenance of an engine.
(Unit : Hour)
Maintenance Daily 50 250 500 1,000 Page Remarks
Check each instrument and
warning lamp.
○
4-11
Check insulation resistance.
○
5-6
Check GFCI receptacles. ○
( Every monthly )
5-7
Generator
How to check thermal relay. ○ 5-7
Check and Clean Clogging of Air
Filter Element.
○ 5-8
Change Air Filter Element ○ 5-12
Drain fuel tank.
(Including sedimenter)
○ 5-8
Check fuel level.
○
4-7
Check engine oil level. ○ 4-6
Check coolant level. ○ 4-6
Check looseness in pipe connector
terminals and tear in wiring.
○ 5-9
Check V-belt tension. ○ 4-7
In the case of NG, it
exchanges.
Change engine oil. ○
( First time )
○
5-5
Change engine oil filter. ○
( First time )
○ 5-6
Change fuel filter.
○
5-9
Change Filter inside Electric
Pump. (SDG45S only)
○ 5-10
Check engine valve clearance.
●
Adjust fuel injection nozzle. ●
Check fuel injection timing.
●
Change coolant. ○
( Every 2 years )
5-11
Clean outside of Radiator and
Intercooler.
(Intercooler: SDG100S only)
○ 5-10
Dirt condition
cleans.
Check rubber hose.
○
5-12
Eng
ine
Clean inside the radiator. ●