Marantz SA-17S1N - Manual (Page 14)

ENGLISH
12
CONNECTIONS
STEREO
FRONT
CENTER SURROUND
MULTI CHANNEL AUDIO OUT
R L L
DIGITAL
R SUB
WOOFER
STANDARD
CUSTOM
IN
OUT
INTERNAL
EXTERNAL
REMOTE
CONTROL
AUDIO OUT
OPT. COAX.
AC IN FILTER
SA-17S1
The method used to connect the player differs depending on the amplifier or AV amplifier used. In order to ensure that the
components are connected properly, refer to the operating instructions of the components which will be connected.
Note:
When making the connections, push the plugs on the ends of the connecting cables firmly into place. Loose connections cause
noise.
Connecting the player to a 2-channel stereo amplifier or AV amplifier
• Performing the analog connections
Use the accessory audio connecting cable q to connect the
player’s MULTI CHANNEL AUDIO OUT (analog output)
STEREO FRONT L and R connectors to the corresponding
audio input connectors (such as the CD input connectors) on
the stereo or AV amplifier to be used.
To listen to Super Audio CDs with these connections, set the
SOUND MODE button to STEREO. (See page 17)
Note:
Do not connect the player’s analog (audio) output connectors
to the PHONO input connectors on the stereo or AV amplifier
to be used.
• Performing the digital connections
This player comes with one OPTICAL digital output connector
and one COAXIAL digital output connector.
Using an optical cable w or coaxial cable e available from
an audio store, connect the player to the digital input
connectors on the AV amplifier, D/A converter, CD recorder
or other component.
When a CD recorder or other digital recorder is connected,
you can enjoy digitally recording the signals from CDs.
Notes:
- Digital signals are output only during CD play. No digital
signals are output during Super Audio CD play.
- Do not bend or bundle the optical digital connecting cable.
(White) (Red)
q
Audio cable
(supplied)
(White) (Red)
To audio input connectors
Stereo amplifier, etc.
Optical cable (Optional)
w
Coaxial cable (Optional) e
Connect these cables to the
digital input connectors on the AV
amplifier, D/A converter, CD
recorder or other component.
: Signal flow