Marantz ST-15S1 - Manual (Page 14)

11
ENGLISH
7 RT (Radio Text)
1. Press the MENU button !4 to select menu.
2. Turn the GYRO TUNING dial !1 to display “RDS”.
3. Press the ENTER button !3 to set the RDS search
selection mode.
4. Turn the GYRO TUNING dial !1 to display “RT
ON/OFF”.
5. Press the ENTER button !3 to set the RT ON/OFF
selection mode.
6. Turn the GYRO TUNING dial !1 to choose the “RT ON”
or “RT OFF”.
7. Press the ENTER button !3 to set whether to enable or
stop the RADIO TEXT function.
• If no text data is being broadcast, “NO TEXT DATA” is
displayed.
OPERATION
7 Switching RDS information display
1. Use the procedure described at “Auto tuning”, “Manual
tuning” or “Recalling preset stations” to tune in a
frequency with an RDS station.
2. Press the DISPLAY button q to switch the RDS
reception information.
• The display switches as shown below each time the
DISPLAY button q is pressed.
q STATION NAME:
Only displayed when the search mode is set to
PRESET and the station name has been registered.
w PS:
The program service name and frequency of the
station tuned in is displayed.
The above is an example for when there is TP
data but no RT data.
e PTY:
The program type of the tuned in broadcast is
displayed.
r CT:
The current time is displayed.
• When the “STATION NAME” is not registered, q is
not displayed.
DISPLAY DISPLAY
TUNED TUNED
STEREO STEREO
DOWN DOWN TUNING/PRESET TUNING/PRESET UP UP
RDS RDS
SECONDARY SECONDARY
DAB/FM/AM TUNER ST-15S1 DAB/FM/AM TUNER ST-15S1
BAND BAND SELECT SELECT
AUTO AUTO
TUNE TUNE
MENU MENU
ENTER ENTER
MEMO MEMO POWER ON/OFF POWER ON/OFF
!1 !4 !3 q
ST-15S1N 01 Eng 06.8.29 2:48 PM ページ11