Marantz DR6050 - Manual (Page 17)

12
ENGLISH
RECORDING (FROM EXTERNAL SOURCE)
The numbers between parentheses refer to the fold-out.
MENU/
STORE CANCEL/
DELETE
0
9 8 7
6 5 4
3 2 1
CD CDR
ABC DEF GHI
JKL MN OPQ
RST UVW XYZ
DISPLAY SPACE SCROLL
FUNCTION
ENTER
Recordable ReWritable
SOURCE REC TYPE
CLOSE OPEN/ CLOSE OPEN/
ERASE FINALIZE
POWER ON/OFF PLAY/PAUSE STOP
REC CDR
CD RECORDER DR6050
PLAY/PAUSE STOP
CD DJ MODE
EASY JOG
PUSH ENTER
CANCEL/DELETE STORE/MENU
PHONES
STANDBY
e r y t
y
• To check the elapsed recording time, press DISPLAY
(72). (This can also be done during recording)
• The recorder stops automatically.
y y y y y To stop recording manually, press 9 9 9 9 9 STOP (5) on the
CD-Recorder.
• If 9 STOP (5) was pressed within 3 seconds after press-
ing PLAY on the selected source, no recording will take
place.
• To interrupt recording, press 2 / ; PLAY/PAUSE (6) on
the CD-Recorder.
To resume, press
0 REC (4) on the CD-Recorder.
After recording the display will show for sev-
eral seconds.
Note:
- Recordings from DAT, DCC or analog sources will only stop
after 20 seconds silence.
- With , recordings from DAT, DCC or
recordings made analogously will stop after 20 seconds si-
lence. With
, the auto stop mode is
disabled.
Important:
If you want to play the recorded CD-R disc on any regular
CD player, it must first be finalized. See finalizing discs.
There is a chance that the sound will be distorted if the
recording level is set at a value that exceeds 0 dB for dig-
ital sound sources and -12dB for analog sound sources.
The factory settings at the time of shipping are 0 dB for
digital sound sources and -12dB for analog sound
sources.
Finalized CD-RW discs play only on CD-RW compatible CD
players.
CD-SYNC
Autostart recording from external CD player CD-SYNC.
The CD-SYNC feature enables you to make fast and easy re-
cordings of a CD. Track increments are automatically detected
from the source material. Track increments cannot be added
manually. In analog source material a silence of 2.7 seconds or
more is automatically detected as a track increment.
q q q q q Make sure the disc is absolutely free of scratches and
dust particles.
w w w w w Connect the cable from an external CD player to the CD-
Recorder. (see INSTALLATION page 5 and 6.)
e e e e e Press SOURCE (12) repeatedly until the selected
source, appears on the display (depending on the digital
connection used):
➔ , or lights up and
, or appears on the
display.
r r r r r With the CD-Recorder stopped, press REC TYPE (11)
four times: if you wish to record a complete disc or pro-
gram.
➔ s t a r t t o f l a s h a n d t h e d i s p l a y s h o w s
.
• If message also flashes, the digital
connection is incorrect.
t t t t t To start recording, press PLAY on the selected source.
➔ The CD-Recorder automatically starts to record. The re-
cording time left appears on the display.
• If or blinks, the digital connecetion is incor-
rect.
• If, however, you start the source during a track, CD-
SYNC recording starts at the beginning of the next track
or after 2.7 seconds of silence in analog recordings.