Activating/pausing/stopping the slide show, 3 activating/pausing/stopping the slide show – Lumens Technology DC211 User Manual
Page 27
English - 26
8.14.3 Activating/Pausing/Stopping the slide show
Remote control:
1. Press [SLIDE SHOW] to start playing.
2. Press [ENTER] to pause playing.
3. Press [ENTER] again to continue playing.
4. Press [SLIDE SHOW] again to stop playing.
Control panel
1. Press [MENU] to enter the Setting Menu.
2. Press [] or [] to select the [Storage] menu.
3. Press [] to find [Slide Show].
4. Press [ENTER] to play.
5. Press [ENTER] to pause playing.
6. Press [ENTER] again to continue playing.
7. To stop playing, repeat Steps 1 to 4.
8.15 I would like to compare images (compare live images
with captured images (PBP))
This function will compare and contrast a live image with a captured image.
If you use the remote control or the control panel:
1. Press [PBP] to enter the PBP (Picture by Picture) photo selection
screen.
2. Press [] or [] or [] or [] to select the file to be compared.
3. Press [ENTER] to activate image comparison.
4. Press [ENTER] to switch selected images (captured image/live
image).
Captured image
Live image
C1
C3
C2
C4
C5
C6
C7