Lumens Technology DC211 - Manual (Page 17)

English - 16
Chapter 5 Start Using
 When using the remote control, aim at the receptor on the DC211,
and press the power button.
 Once DC211 is turned on, the LED on the control panel will flash a
few times and stay lit. Please contact your distributor if the LED is not
on.
1. Place an object to be displayed
under the camera.
2. Turn on Power .
3. Adjust the gooseneck and lens to
the appropriate positions.
4. Press [AUTO TUNE] button
to optimize the image. You are
ready to teach / present.
 Each time the camera head is
moved, press the [FOCUS]
button to refocus the lens.