Canon XLH1 - Manual (Page 84)

84
Saving the Custom Preset Settings in Use with a Still Image on the
Memory Card
In mode, you can save the custom preset settings currently being used on the memory card
along with a still image of the recording. This is very useful when you want to load the custom preset file
later by selecting the still image of that specific scene.
Open the menu and select [RECORDING SETUP]. Select [STILL I. REC], set it to [ON + CP
DATA] and close the menu.
While you are recording on the tape, press the PHOTO button.
The custom preset currently in effect will be saved to the memory card along with a still image of the current
scene. When saving the custom preset currently in use embedded in a still image, the number of custom
preset files you can save is not limited to 20 files but you can record as many still images/CP files as the free
available memory on the memory card will allow you.