When more than one sensor is to be used – La Crosse Technology WS-9625U-IT User Manual
Page 11
10
4.
In order to ensure sufficient 915 MHz transmission however, this should under good
conditions be a distance no more than 100 meters between the final position of the
Weather Station and the sensor (see notes on “Mounting” and “915 MHz Reception”).
When more than one sensor is to be used
1.
User shall remove all the batteries from the Weather Station and sensors and wait 60
seconds if setting has been done with one sensor before.
2.
Insert the batteries to the first sensor.
3.
Within 30 seconds of powering up the first sensor, insert the batteries to the Weather
Station. Once the batteries are in place, all segments of the LCD will light up briefly.
Following time as 12:00 and the Oscar Outlook icon will be displayed. If they are not shown
in LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before
reinserting them.
4.
The outdoor temperature and humidity from the first sensor (channel 1) should then be