4 ffc connection method – Interlink Electronics FSLP Sensor User Manual
Page 10
www.interlinkelectronics.com
8
Force Sensing Linear Potentiometer (FSLP)
Integration Guide
4.4
FFC Connection Method
Recommended Tail Connector:
JST 4-pin SMT connector (JST Part Number: 04FM-1.0SP-1.9-TF)
Interlink recommends the above connector, but any compatible connector may be used.
Refer to Figures 7 and 8 for sensor tail dimensions.
Figure 7: Top view of sensor tail. All dimensions are in millimeters.
Figure 8: Side view of sensor tail. All dimensions are in millimeters.