Intellinav 3 - Manual (Page 12)

11
Intellinav 3
You can set a destination with the Intellinav system many
different ways. Once you have set a destination, you can
add a detour or a stopover.
The Intellinav system also offers an Itinerary feature,
where you can enter up to 100 destinations and use the
Itinerary screen to re-order destinations as you like.
Setting a Single Destination
You can set your destination the following ways:
Address
Intersection
Point of Interest (POI)
Favorites
Recent
City Center
When you have found your destination, you have several
options:
Nav
Fav
Show
Nav calculates the route from your current location (or
the location you set as a starting point) to the
destination.
Fav adds the destination to your Favorites list. Your
Favorites list is a list of locations that you can add
destinations to. You can also enter a name for a
destination and delete destinations from the list.
Show displays the location on the panning map without
calculating a route. You can also use it to manually set a
starting point for a route.
Using an Address as a Destination
There are two ways to enter the address: by selecting
the street first, or by selecting the city first. If you use
Street First and too many records match, you will be
asked to use City First.
NOTE: You will be prompted for the street name first,
then the house number.
To Enter an Address as a Destination Using Street
First:
1. Tap Menu. The main menu appears.
Entering Your Route
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 13