InSinkErator LC-50 - Manual (Page 6)

6
Loosen the 3 screws on the mounting assembly. Using a screwdriver, remove the snap ring.
Removing Existing Disposer
Evenly apply 1/2" thick rope of plumber’s putty around
new flange.
9
Press flange firmly into sink drain. Remove excess putty.
10
Remove flange from sink. Remove old plumber’s putty from sink with putty knife.
7 8
Installing the Disposer
Sink Flange
5 6
If the new disposer mounting is the same as the old one, you can go to step 14.