ILS ILS21H - Manual (Page 27)

ILS21HL INSTRUCTIONS MANUAL
ILS21 HL Page 26
Setting up
In order to set up the ILS21HL properly the following steps have to be taken, which will
minimize the chance of problems occurring during the procedure. The assembly process should
be performed by at least 2 people.
Step 1:
First the side tables have to be fixed to the stand. While tightening them, it has to be made sure
that they are horizontal. Then the ILS base plate has to be mounted. All the cables have to be
pulled through the cable hole. Then the plate with the tablet`s center piece and the cable guide
plate have to be mounted onto the pillar.