ILS Presentation Systems - Manual

Installing the new ILS pedestal.
The ILS pedestal places ILS22, ILS21, ILS15 or other VESA mountable displays on an electrically
height-adjustable foot. There are 5 parts in the pedestal that are need to be put together with the cables
that are selected by the customer for support of the specific lectern display.
Figure 1. The pedestal components for the ILS22GL
Clockwise: The top support plate, 2 cable guides, 1 floor module, 1 Powerlift pillar.
The 2 cable guides have a long steel rod on a frame with the exact appearance of the top and the bottom part of
the pillar, these will go with the pin sticking inside on the top between pillar and top support plate and the bottom
one will go with its pin past the motor in the bottom and fits between the bottom of the pillar and the floor plate.
M8 screws hold the system together.
ILS Presentation Systems
Better for presenters, better for the audience
Intelligent Lectern Systems BV Amsterdam / Westerbork / Mumbai / San Diego
write to [email protected] , call +31 20 2400232 (Henk de Groot)
Product specifications are subject to change. 081001EN