ILS ILS16P User Manual

Page 2

Check if the dials are functioning properly. Rotating the left one between Internal PC, left and right notebooks

shows the lights under the 4 buttons at the Extron switcher below. In the dial on the top is also a USB switcher

(note there is a USB hub inside the cabinet top under the display part.) Rotating the right dial controls the 2 way

switcher with feedback loop to the monitor. When the 2nd dial is in Presentation mode – it connects to the second

port of the internal PC. Note that it has an extra label “presentation” on the cable, so that you can plug it in the

proper VGA port. In this position, the first dial shows on the monitor the image of the primary VGA port of the

internal PC or the external notebook sources. This way you can connect notebooks during presentations or look for

data from a notebook, internet or form a document camera and show it to the audience only when ready by

rotating the second dial to the PC setting. This keeps continuous display during seminars! Test if the dials are still

fixed tightly on their axis. If they are loose and start to rotate around, these need to be glued to fixate.

Create the audio connections to the Extron switcher blue connector, often the second switcher audio is ignored,

but up to you where you connect the audio output. (4-way switch or 2-way switch)

Install the PC from your local IT department, connect to the LAN hub

Roll out the long cable and install all connectivity. Check the VGA

On the PC the following items are installed:

a. Operating system

b. Office 2007

c. Sho-Q 1 (if XP or basic Office is used), Sho-Q 7, if Vista is capable of using AERO.

d. Touch screen drivers

e. License key for sho-Q (send us an email with the machine install code from the PC )

and we will respond with the license key.

f. Common use audio and video CODECS, Adobe Flash, Windows Media Player, etc

When all is working, start to add the doors on the sides; these are on rapid release hinges.

Mount the left and right side panel. Are all locks top & bottom in place?

10. Install the presenter side front door. Do you have the locking keys?

11. Install the front panel, by lifting the top door and slide it in. After the top door is locked, this panel cannot be

removed. Standard this is a durable ebony front panel. If a timely design is received here, we will substitute this

panel with one that has includes a logo if that was ordered.

12. Clean the system and inspect that all functions and connections/switchers are working.

In case of any questions, mail to

or call +31 653 857 869