IDK HDC-H100-C - Manual (Page 12)

HDC-TH100-C/HDC-RH100-C User’s Guide
12
4.2 Receiver (HDC-RH100)
①
②
④
⑦
⑥
⑤
⑧ ③
Rx
R
S
-2
3 2
C
L
AN
Cat6 Rx for HDMI
POWER LINK HDCP STATUS POWER LINK HDCP POWER LINK HDCP STATUS FG
D
C
5V
2A HDC-RH100-C
IN
P
UT
DON'T
CONNECT LAN H
D
Ba
s e
T
CAUTION
!
(M
A X 2 M )
H DM
I
O
U
TP
U
T
[Figure 4.2] Panel drawing (HDC-RH100)
[Table 4.2] Item descriptions (HDC-RH100)
# Part name Description
① LAN port Port for LAN signals
② RS-232C port Port for RS-232C signals
③ LED lights POWER (Green): Lights when power is supplied from the AC adapter.
LINK (Orange): Lights when an HDC transmitter is connected.
Blinks (0.5 second-interval) when the destination is in
standby state. LAN and RS-232C communications are
available.
Turns off when no connection.
HDCP (Yellow): Lights when there is an access to HDCP.
Blinks when there is no access to HDCP.
Turns off when any input signals are not recognized.
④ AC adapter connector Connector for the supplied AC adapter.
⑤ Cable fixing hole Hole for the supplied cable clamp
⑥ HDMI output connector Output connector for HDMI signals
Connect sink devices such as TV and projector.
⑦ Input connector for
extension
Output connector for HDBaseT signals.
Connected to the transmitter of the HDC series.
⑧ Frame ground Ground terminal