beautypg.com

BSS Audio BLU Series Install Guide User Manual

Page 14

background image

8

ANALOGUE OUTPUTS
Connectors:

Up to 16 electronically balanced on Phoenix/Combicon removable screw connectors

Output Impedance:

40 Ohms balanced, 20 Ohms unbalanced

Maximum Output Level:

+19dBu

Frequency Response:

20Hz to 20kHz [+0�5/-1dB]

THD:

<0�01% [20Hz to 20kHz, +10dBu output]

Dynamic Range:

108dB typ� [22Hz to 22kHz unweighted]

Crosstalk:

<-75dB

D/A Latency:

28/Fs [0�58ms@48k, 0�29ms@96k]

DIGITAL OUTPUTS
Connectors:

Up to 16 AES/EBU or S/PDIF on Phoenix/Combicon removable screw connectors

Output Impedance:

110 ohm [AES/EBU], 75 ohm [S/PDIF]

Sample Rate:

48kHz or 96kHz

Sample Rate conversion:

8kHz-96kHz

THD+N:

<-140dB

Latency SRC OFF:

6/Fs [0�13ms@48k, 0�06ms@96k]

Latency SRC ON:

60/Fs [1�25ms@48k, 0�63ms@96k]

CONTROL PORTS
Number of Ports:

12 inputs and 6 outputs

Control Input Voltage:

0 to 4�5v

Control Input Impedance:

4�7kOhms to +5V [2-wire mode] >1MOhm [3-wire mode]

Logic Output Voltage:

0 or +5V unloaded

Logic Output Impedance:

440 Ohm

Logic Output Current:

10mA source, 60mA sink

WATCHDOG OUTPUT
Connector:

Phoenix/Combicon connector for failsafe control

Opto Output current:

14mA maximum

Withstanding voltage:

80V maximum [Off]

Series Impedance:

220 Ohms [isolated]

CONTROL NETWORK
Connectors:

RJ45 Ethernet connector

Maximum cable length:

100m/328ft on Category 5 cable between device and Ethernet switch

BLU LINK AUDIO NETWORK [BLU-800, 320, 160, 120]
Connectors:

2 x RJ45 Ethernet connectors

Maximum cable length:

100m/328ft on Category 5e cable between devices

Latency:

11/Fs [0�23ms@48k, 0�11ms@96k]

Pass Through Latency:

4/Fs [0�08ms@48k, 0�04ms@96k]

COBRANET™ AUDIO NETWORK [BLU-80, 32, 800, 320]
Connectors:

2 x RJ45 connectors

Maximum cable length:

100m/328ft on Category 5 cable between device and Ethernet switch

Latency:

1�33ms-5�33ms

DANTE™ AUDIO NETWORK [BLU-806, 326]
Connectors:

2 x RJ45 connectors

Maximum cable length:

100m/328ft on Category 5 (100Mbps) or Category 5e/Category 6 (Gigabit) cable

between devices

Latency: 0�15ms-5�0ms

AVB AUDIO NETWORK [BLU-805, 325]
Connectors:

2 x RJ45 connectors

Maximum cable length:

100m/328ft on Category 5e cable between device and AVB compliant Ethernet switch

Sample Rate:

48kHz

Latency:

0�5ms-2�0ms

Compatible AVB Switches:

BSS Audio/NETGEAR GS724T Ethernet Switch

LABX Titanium 411 Ruggedized AVB Ethernet Bridge Switch