Bluelab Dosetronic Solenoid Kit - Manual (Page 5)

1
Version S1.3 : 260511
Bluelab Dosetr
onic Solenoid Kit
Bluelab Corporation Limited
1.1 Quick Guide
This page shows a quick guide
to setting up the Dosetronic in
monitor mode. It serves as a quick
way to check that the controller is
operational.
1. Prior to mounting, attach
the Temperature, pH and
Conductivity probe to
Dosetronic unit.
2. Plug in power adaptor.
3. Place probes in solution.
4. Wait a few minutes for readings
to stabilise.
1
2.7
28
5.9
2.4
2.1
5.6 5.6
2.1
2.4
Monitor mode
Temperature probe
pH probe
Conductivity probe
Power adaptor
Menu change
2
2
2
3
1
5
4
W
ater
Air