Becker TRAFFIC ASSIST HIGHSPEED 7934 - Manual (Page 29)

28
General operations
The back key
The back key is integrated in the bottom
left hand corner of the casing.
It has various functions:
• Pressing and holding switches the
Traffic Assist Highspeed to standby
and back on again when in standby
mode.
• depending on the menu context, if
pressed briefly, you will be returned to
the previous entry level.
More maps
When supplied, a set of maps is already
installed on the memory card. If this is
insufficient for the current location, the-
re are others on the DVD supplied. The-
se should be loaded on to the memory
card. The countries covered by the indi-
vidual map sets appear in the installer
prior to installation.
Map loaded
The map currently loaded can be called
up directly from Traffic Assist High-
speed (see also page 49).
Installation program
There is a map installation program on
the map DVD. Once the DVD is inserted
in a personal computer's DVD drive, this
program will usually start up automati-
cally. The program guides you through
the installation process.
Otherwise, you will have to start the pro-
gram manually.
X Open Windows ® Explorer.
X Select your DVD drive folder.
X Double click on the "Setup.exe" file.
Transferring files
Files can be transferred indirectly via the
memory card or directly via the USB
port.
Transferring using the SD card
reader
The simplest and fastest form of transfer
is to use a standard SD card reader (does
not fall within the scope of supply). The
memory card is plugged into this.
The files required are then saved on
the memory card using the computer's
software.
5014
Note:
Only the maps supplied in the Traffic
Assist Highspeed may be used. The in-
stallation or transfer of files or pro-
grams which limit or modify the func-
tion of the Traffic Assist Highspeed is
prohibited!