Becker EDITION TRAFFIC ASSIST PRO 7929 TMC - Manual (Page 25)

25
General operations
Horizontal movements
X Loosen the fastening screws (5) far
enough to be able to swivel the bracket
(2) from left to right without exerting
excessive force.
X Steady the unit holder with one hand
and swivel the bracket (2) to the desi-
red position on the left, right or in the
centre.
X Steady the unit holder with one hand,
pull the bracket (2) forwards against
the spring force with the other and turn
to the desired position.
X Release the bracket (2).
Attaching the Traffic Assist
Pro
The unit holder is fitted with a bracket.
X Carefully position the Traffic Assist
Pro on the bracket.
X Slide the Traffic Assist Pro
downwards until it audibly engages.
Your navigation unit is now in position
and ready for use.
Connecting the telephone mute
function
You can connect your Traffic Assist Pro
with TMC to your car radio using the
optional cable for the telephone mute
function. Once this cable is connected
correctly, your Traffic Assist Pro mutes
the car radio for route guidance
instructions.
X Insert the jack on the cable into the
socket on the TMC receiver.
X Connect the other end of the cable to
the telephone mute socket on your
radio (see the manufacturer’s
connection specifications).
Note:
To remove the Traffic Assist Pro, use
both hands to pull the unit carefully
upwards out of the bracket. 4004