Anthony Gallo Reference 3.5 - Manual (Page 16)

Nucleus Reference 3.5 Specifications
Frequency Response 34 Hz – 20 kHz ±3 dB
Nominal Impedance 8 Ohms
Sensitivity 88 dB at 1 watt and 1 meter
Power Handling, 350 Watts
Continuous Undistorted
Tweeter CDT™ 3, 3 kHz to 20 kHz, 300° dispersion across full
tweeter bandwidth
Midrange Dual 4-inch, carbon fiber cone drivers optimized for
crossover-less design
Woofer Custom long-throw 10-inch ceramic-coated aluminum
cone dual voice-coil driver
Dimensions Height: 35 in. (88.9 cm)
Width: 8 in. (20.3 cm)
Depth: 16 in. (40.6 cm)
Weight 47 lbs. (21.3 kg)
Available with driver enclosures in Matte Black, or Brushed Stainless Steel with
Matte Black composite base
13
Adjacent Wall, Toe In and Straight Ahead Placement
Due to décor considerations you may need to position your Nucleus Reference 3.5s within
just a few inches of the wall behind them, but the sound will be more "open" when the
speakers are 12 to 36 inches out into the room. The Nucleus Reference 3.5's can fire
straight ahead, or be angled (toed) inward (Figure 3) towards the listening position. Stereo
imaging will be more specific when angled in, and upper bass will be more prominent and
"faster" sounding.
12
Figure 3. Placement of the Speakers
Toe In Placement Straight Ahead Placement