Analog Way LIVECORE PLATFORM TPP Current Programmer's Guide - Manual (Page 25)

25
PROGRAMMER'S GUIDE FOR v02.00.46
3.6 Single Screen TAKE : Transitioning the Preview content to the Program (single screen)
3.6.1 Usage
The single screen “TAKE” action allows transitioning, for a single screen, the “Preview” content (next
state) to the “Program” (current state) using the current transition.
3.6.2 LiveCore™ transitions reminder
Picture modifications can be made directly on the program screen or can be prepared on the preview
screen and applied synchronously through the TAKE command. The device will apply all preset changes in
one step, using the user parameters.
3.6.3 Detailed commands sequence

Launch the TAKE action : Launch the TAKE by writing the value 1.
Syntax : , 1SPCtk
L
F
is the Web RCS screen number minus 1.
Only value 1 is allowed, machine will immediately acknowledge the command.

Wait until the end of operation : Operation is ended when register SP_TAKE value returns to 0 and
when register GROUP_AVA value is 1.
In the following lines, is the Web RCS screen number minus 1.
Answer 1 : SPCtk ,0
C
R
L
F
wait until this answer is received.
Command 2 : , GCava
L
F
send this read command.
Answer 2 : GCava ,1
C
R
L
F
and wait until this answer is received.