American Time Wireless Digital Message Board User Manual
Page 4
© American Time
4
Remote Connect Web Interface
The Remote Connect Web Interface allows remote access to your SiteSync IQ system controller via a
web browser. This feature is available to all SiteSync IQ system controllers with the Ethernet option.
Please reference the SiteSync IQ Installation and Operation Manual for more details.
To Access Remote Connect:
1. Open a web browser. Enter the IP address for your system controller a
the web browser’s Address field (Figure 1). Press the
Enter key.
2. A User Login window, (Figure 2) will appear. There are two available user names,
uclock and
sclock, which represent the user and service access levels. The user security level allows access
to everything but the Configuration Tab.
User Level Access:
Enter
uclock in lowercase letters in the User Name field and uclock in the Password field. This
user login allows access to time/date, messaging, and event menus.
Service Level Access:
Enter
sclock in lowercase letters in the User Name field and sclock in the Password field. This
user login allows access to all menus.
Note: Passwords may be changed in the Configuration Tab.
Then, click the Login button.
3. The Remote Connect utility will appear with the General tab selected. The tabs displayed may
differ depending on the configuration of the unit.
For more details on the features of Remote Connect, click on the Support link in the upper right-
hand corner of the utility (Figure 3).
Figure 3
Figure 2
Figure 1