Adept Smart Vision MX - Manual (Page 14)

Chapter 2: Installation
A
Units are mm (in.)
Detail A
124.0
(4.9)
240.0
(9.5)
260
(10.2)
4.25
(0.17)
10.0
(0.39)
R4.0
(0.16)
Figure 2-1. Dimensions for Desk-top Mounting
NOTE: Use 6-32 UNC screws, or screws of similar length and specifications, for
mounting the processor to other equipment. The recommended screw length is 1/8
in. or 3.2 mm.
Stack Mounting
The SmartVision MX industrial PC can be stack-mount on top of a SmartController motion
controller, using two mounting brackets available as an option with the industrial PC. Two
views of one is shown in the following figure.
Figure 2-2. Side and Iso Views of SmartVision MX-SmartController Mounting Bracket
The mounting brackets are strictly a mechanical attachment. No electrical connections are
involved.
Adept SmartVision MX User’s Guide, Rev. A
Page 14 of 34