wePresent WiPG-2000 - Manual (Page 23)

23
8.5 Login
1) When connecting to a “Code” protection enabled WiPG-2000 receiver, you have to
enter the “Code” and press the “Connect” button to login the receiver.
(You can find the CODE from the OSD standby screen or right-upper corner of start
screen)
(Enter the code into the circled area)
2) If you want to connect to another receiver or cancel the login, please press the
“Cancel” button.
8.6 Change to another WiFi Network
1) If you press the “WiFi” icon, WiPG-2000 application will search the available WiFi
Network and list the WiPG-2000 WiFi Device. You can select a network and press
the “Connect” button to connect the selected WiFi Device.
2) You can press the “Refresh” button to search again or press the “All” button to list
all available WiFi Network name.
3) If you don’t like to change the WiFi Network and want to keep the connection to
current network, you can press the “Cancel” button.