beautypg.com

Signamax 5-Port 10/100 Compact Industrial Unmanaged Switch User Manual

Page 16

background image

Industrial Ethernet Switch

16

Cabling

Step 1: First, ensure the power of the switch and end devices are turned off.

Always ensure that the power is off before any installation.


Step 2: Prepare cable with corresponding connectors for each type of port in

use.

To connect two regular RJ-45 ports between switches or hubs, you need a

straight or cross-over cable.


Step 3: Consult the previous section for cabling requirements based on

connectors and speed.


Step 4: Connect one end of the cable to the switch and the other end to a

desired device.


Step 5: Once the connections between two end devices are made

successfully, turn on the power and the switch is operational.