Signamax 8-Port 10/100BaseT/TX Full-Power PoE Switch with 8 PoE Ports - Manual

065-7308POE Series
1
FCC Warning
This device has been tested and found to
comply with limits for a Class A digital device,
pursuant to Part 15 of FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates
and radiates radio frequency energy and, if
not installed and used in accordance with the
Quick Start Guide, it may cause interference
in which case users will be required to correct
interference at their own expenses.
CE Warning
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
This switch provides 8 10/100M ports. It was
designed for easy installation and high
performance in an environment where traffic
is on the network and the number of users
increases continuously.
It consists of 8 PSE/PoE ports. That can solve
the limitation of the power outlet location and
offer the system designer a flexible solution to
locate the network device everywhere.
The compact rigid desktop size was
specifically designed for small to medium
workgroups. It can be installed where space
is limited; moreover, it provides smooth
network migration and easy upgrade to
network capacity.
Package Contents
Before you start to install this switch, please
verify your package that contains the following
items:
One PoE Fast Ethernet Switch
One Power Cord
One Quick Start Guide
Note: If any of these items is found missing or
damaged, please contact your local supplier
for replacement.
Key Features
8 Port 10/100M Nway (Auto-negotiation)
Switch
8 PSE/PoE function ports
Supporting the power Max. 15.4 W for each
PSE/PoE port
11” Desktop size with metal case
Can be installed in
a 19” cabinet by
rack-mount kits
Auto-learn of networking configurations
Auto-detect full/half-duplex modes for any
port
Dedicated full-duplex 200Mbps bandwidth
Store-and-Forward switching methods
IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
Non-blocking & Non-head-of-line blocking
full wire speed forwarding
Auto-MDI/MDI-X function for any port
Smart plug & play
Front Panel (LEDs)
LED Indicators of 8 Port PoE 10/100M
Switch
LED Status Description
On Power is on. Power
Off Power is off.
On Port is for connection.
Off No connection.
LINK/ACT
Flashing Data is transmitting or
receiving
On Port is linked to Power
Device PoE
Off No Power Device is
connected