Dataman Vali-File 3.0 - Manual (Page 17)

- 17 -
algorithm. The option is only available in the “Regular
Signature” mode. Seed values range from 0000 to FFFF. Each
value will produce a different result. Gaming Laboratories
International, Inc. uses a seed value of 0000 in the signatures
they provide on approval letters and reports. Listed below is
how you select the same mode within the Vali-File program.
This window appears when you check the CDCK box on the
main screen. To change the seed value, just enter the desired
value, if other then the default value of 0000.
ITEM 2: Check an entire disk. This option will prompt the
user for the disk drive to check and then read and produce a
signature for the entire disk. Listed below is how you select the
same mode within the Vali-File program. Select the “Files in
folder and subfolders” mode from the main screen as shown
below:
Once you have selected the above mode, click the “select”
button and choose the desired drive you want to validate.
The following window will appear, allowing you to choose the
drive of your choice. Once you have selected the desired drive,
click “OK”.