beautypg.com

Denon AVR-5700 User Manual

Page 10

background image

10

Connecting a Video Component Equipped with Color Difference (Component - Y, R-Y, B-Y) Video
Jacks (DVD Player)

• When making connections, also refer to the operating instructions of the other components.
• The signals input to the color difference (component) video jacks are not output from the VIDEO output jack (yellow) or the S-Video output

jack. In addition, the video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component)
video jacks.

• The AVR-5700’s on-screen display signals are not output from the color difference (component) video output jacks (MONITOR OUT).
• Some video sources with component video outputs are labeled Y, Pb, Pr, or Y, Cb, Cr, or Y, R-Y, B-Y. These terms all refer to component video

color difference output.

OUT

OUT

6 16

R

L

Y

C

B

DVD

TV/DBS

COMPONENT VIDEO

FRONT

R

L

SURROUND

SPEAKER

IMPEDANCE

FRONT CENTER /

MONITOR

ROOM TO ROOM

REMOTE

CONTROL

C

R

Y

C

B

C

R

Y

C

B

C

R

A

IN

IN

IN

Y

Pr

Pb

B

B

VIDEO OUT

Pr

Y

Pb

COMPONENT

VIDEO IN

COMPONENT

DVD player

Connecting a DVD player

DVD IN jacks
• Connect the DVD player’s color difference

(component) video output jacks (COMPONENT
VIDEO OUTPUT) to the COMPONENT DVD IN jack
using 75

/ohms coaxial video pin-plug cords.

• In the same way, another video source with

component video outputs such as a DTV/DBS
tuner, etc., can be connected to the TV/DBS color
difference (component) video jacks.

Connecting a monitor TV

MONITOR OUT jack
• Connect the TV’s color difference

(component) video input jacks
(COMPONENT VIDEO INPUT) to the
COMPONENT MONITOR OUT jack
using 75

/ohms coaxial video pin-

plug cords.

Monitor TV

• The color difference input jacks may be indicated differently on some TVs,

monitors or video components (“Pr, Pb and Y”, “R-Y, B-Y and Y”, “Cr, Cb and
Y”, etc.). For details, carefully read the operating instructions included with the
TV or other component.

• Do not connect high definition (DTV) signals to the component video input

jacks. Connect a high definition TV tuner directly to the monitor, if it is capable
of displaying HDTV signals.

NOTES (refer to page 6)
• Shorting pin plugs are inserted into the PHONO input jacks to prevent noise if the PHONO input is selected and there is no turntable

connected. Remove these pin plugs when connecting a turntable.

• DO NOT insert the shorting pin plugs into the REC (recording output) or pre-out jacks. Doing so may cut off the sound and may damage the

AVR-5700 and connected components.