Dynex DX-PDVD7 - Manual (Page 23)

Specifications 23
• If running on battery power:
• Make sure that the battery is secured in place on the back of the DVD player.
• Make sure that the battery is fully charged.
• Make sure that the battery and AC power adapter are not both plugged in. If so,
disconnect the AC power adapter.
Specifications
Changes to the design and specifications may be made without notice.
FCC statement
FCC warning
This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly
approved in the instruction manual.The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
Caution: Any change or modification to the player not expressly approved by the
manufacturer or its authorized parties could void your authority to operate the player.
Laser safety
Location: Inside, near the deck mechanism.
This unit employs a laser. Only a qualified service person should remove the cover or attempt
to service this device, due to possible eye injury.
Laser
Semiconductor laser
Wavelength 650 nm~795 nm
Video system
NTSC
Compatible discs
DVD/DVD+R/DVD+RW/DVD-R/DVD-RW/CD/
CD-R/CD-RW/MP3
Frequency response
20 Hz ~ 20 KHz
Signal/noise ratio
> 60dB
Dynamic range
> 85dB
Power supply
DC 9V
Rechargeable Ni-Mh battery
Operating temperature
41 ~ 95°F (5 ~ 35°C)
Screen size
7 inches
Dimensions
W × D × H
7.96 Ч 6.29 Ч 1.47 inches
(195 Ч 154 Ч 36 mm)
Weight
1.79 lbs (0.81 kg)