Datacard Group 553772-001 - Manual (Page 20)

Page 17
Cleaning the printer
Run a cleaning card and change the cleaning sleeve
when changing the print ribbon.
1 Open the printer cover and remove the ribbon
cartridge.
2 Remove the replaceable cleaning roller.
3 Open the card tray door (1).
4 Remove unprinted cards from the card tray (2).
5 Open the Printer Toolbox (if needed, see page 15).
Make sure that all cards are printed so the Clean
Printer button is enabled.
6 Click the Clean Printer button. A prompt to insert the
cleaning card appears.
7 Open the cleaning card package and remove the
cleaning card.
8 Place the cleaning card in the card tray (3).
9 Click OK on the message box. The printer moves the
card through the printer several times and then ejects
the card.
Clean Printer
button