Dakota Digital MCL-3000 - Manual

Manual # 650339
MCL-3000 SERIES OIL TEMP
PART# MCL-3K-TMP
Thank you for purchasing the Dakota Digital MCL-3K-TMP gauge for your Harley Davidson Touring bike.
This gauge is designed to be a direct, plug in replacement for all touring models from 1996 and up. This
is part of a six gauge package for touring models so you can add additional gauges as you choose.
The MCL-3K-TMP gauge comes with a temperature sensor that gets installed in the oil pan. You
must use the supplied sensor, other sensors will result in inaccurate readings.
INSTALLATION
First read and familiarize yourself with all of the components and this manual. The first step is to
remove the seat and disconnect the negative side of the battery, as with any electronic install. Once the
battery is disconnected you are ready to start.
REMOVAL OF FACTORY GAUGES
Remove the outer fairing; this will vary from model to model, please follow the service manual to
expose the wiring and gauges. Don’t be alarmed by the amount of wires behind the fairing, this is a
direct plug in kit and these detailed instructions will guide you through it.
Pic of street glide with outer fairing removed Pic of road glide with outer fairing removed
POWER
(+12V Key ON)
GROUND
SENDER
(Connects to supplied
temp sensor ONLY)
SWITCH/DIM PLUG
GREEN - Switch +12V
BLUE - Dim +12V