Spectrum Controls 1734sc-IE2CH - Manual (Page 31)

Chapter 3: Configuring the 1734sc-IExCH for RSLogix 5000 3-9
User’s Manual Pub. 0300257-01 Rev. A
6.) Enter an RPI Rate
7.) Configure the rest of the module using the “Module Configuration” tab and the
“Channel Configuration” tab.
Section 3.5
Module
Configuration
The IExCH can be configured using the AOP (Add-On-Profile) or by using the 1734
generic module profile. The configuration tags for the IExCH are located under the
controller tags. The following examples describe the tag structure allocated by the
Generic Module profile and the AOP.
Set the RPI rate
Name the module