DoubleSight Displays DS-15xx - Manual (Page 20)

User’s Manual
12 Setting Up Your Monitor
Holding the base stand handle, insert its three prongs (located on the
handle’s reverse side) straight down into the three holes on the
display’s back silver face plate. To secure the prongs into a locked
position, push the stand forward until it connects to the display
securely. Using both hands, firmly grip the combined display with
stand and place upright on a desk with the monitor’s back panel facing
you. Please ensure that the display and base are securely connected
before moving.
Connecting the Monitor to a Computer
Locate the blue video signal adapter cables marked 1 and 2. With the
small monitor icon facing towards you, insert the blue VGA cable 1
into the monitor’s VGA-1 port (right), and then the VGA cable 2 into
the VGA-2 port (left). Tighten each of the blue screws to secure.
Next, locate the black power cable and insert it into the monitor’s DC-
IN port with the ↑ arrow icon facing towards you. Connect the
opposite end into a power outlet.
Push forward