MK Plastics RBK IO&M - Manual

Bulletin 62-January-20-09
ROOF UPBLAST & SIDEWALL
CENTRIFUGAL FIBERGLASS EXHAUST FAN
INSTALLATION, OPERATION, AND MAINTENANCE MANUAL
RBK FRP FAN
The M.K. Plastics catalog on the above corrosion resistant FRP fan, provides additional information describing the equipment,
fan performance, available accessories, and specifications.
For additional safety information, refer to AMCA publication 410-96, Safety Practices for Users and Installers of Industrial and
Commercial Fans.
For Information on special fan application requirements, contact M.K. Plastic’s corporate office at (514) 871-9999.
Receiving and Inspection
Carefully inspect the fan and accessories for any damage and shortage immediately upon receipt of the fan.
•
Turn the wheel by hand to ensure it turns freely and does not bind.
•
Inspect the dampers (if supplied) for free operation of all moving parts.
•
Record on the Delivery Receipt any visible sign of damage.
WARNING
This unit has rotating parts. Safety precautions
should be exercised at all times during installation,
operation, and maintenance.
ALWAYS disconnect power prior to working on fan.
Fig. 1 – The RBK Fan
1