MK Plastics Inline Fan IO&M - Manual

Bulletin 90- 01- NOV2002
FRP Centrifugal & Inline Fans
INSTALLATION, OPERATION, AND MAINTENANCE MANUAL
This publication contains the installation, operation and maintenance instructions for the following corrosion resistant
FRP fans:
• CNW
• DHK
• PVK
• PRVS
• AXCL
M.K. Plastics catalogs on the above corrosion resistant FRP fans, provides additional information describing the equipment, fan
performance, available accessories, and specifications.
For additional safety information, refer to AMCA publication 410-96, Safety Practices for Users and Installers of Industrial and
Commercial Fans.
For Information on special fan application requirements, contact M.K. Plastic’s Corporate office at (514) 871-9999.
Receiving and Inspection
Carefully inspect the fan and accessories for any damage and shortage immediately upon receipt of the fan.
• Turn the wheel by hand to ensure it turns freely and does not bind.
• Inspect the dampers (if supplied) for free operation of all moving parts.
• Record on the Delivery Receipt any visible sign of damage.
WARNING
This unit has rotating parts. Safety precautions
should be exercised at all times during installation,
operation, and maintenance.
ALWAYS disconnect power prior to working on fan.
Handling
Lift the fan by the base or lifting lugs. Never lift by the shaft, motor or housing. See Fig. 1 – Fan Lifting Lug Details.
Fig. 1 – Fan Lifting Lug Details
1