Parts list – Lingenfelter L330030709 CTSV High Flow Intercooler Pump Upgrade Kit v1.0 User Manual
Page 2

Page 1.
Parts List
Lingenfelter CTS-V High Flow Intercooler Pump Upgrade Kit (PN: L330030709)
#
Part number
Description
1
TAFX410110
VariMax pump
1
XX05102-0016
CTS-V VariMax intercooler pump bracket
1
XX05102-0015
CTS-V to VariMax intercooler pump adapter harness
1
12047835
Connector mounting clip
Optional Items
#
Part number
Description
1
L320030709
CTS-V LSA intercooler radiator kit with fans
2
54205K11
Stainless Steel Constant tension worm gear clamp
2
7329K16
Spring clamp
Thank you for purchasing the Lingenfelter Performance Engineering (LPE) VariMax CTS-V high flow
intercooler pump upgrade kit. This kit is intended to bring the intercooler flowrate of the CTS-V up to
the same flowrate as the ZL1 Camaro. As you can see in the chart provided on the next page, the
factory CTS-V intercooler pump flows 25% less fluid per minute than the factory intercooler pump in
the ZL1 Camaro. The VariMax intercooler pump, also shown in the chart on the next page, provides
the same flowrate as the factory ZL1 Camaro intercooler pump. This kit is designed to provide easy
mounting of the intercooler pump through a custom mounting bracket. Finally, this kit features a plug
& play harness with an additional connector to allow for easy wiring of an optional manual override
switch. Installing a manual override switch could be used to circulate the intercooler fluid between
runs to help cool the fluid in drag racing applications.
Read the entire instruction manual before beginning installation. Many of the stock parts will
be used in reassembly.
When referencing the side of the vehicle, the driver side of the vehicle is considered the left
side and the passenger side of the vehicle is considered the right side of the vehicle.
Due to the thermal expansion of rubber coolant hoses, LPE does not recommend using
worm gear clamps to clamp the hoses to the intercooler pump. Because worm gear clamps
do not apply constant tension to the hoses, the hoses can leak when exposed to cooler
temperatures. LPE recommends the use of the OEM constant-tension clamps or spring
clamps as superior alternatives to the standard worm gear clamp.
Tools & Materials Required
• Jack
• Jackstands or vehicle hoist
• Hose clamp pliers (or equivalent)
• Drain bucket (or equivalent)
• Ratchet
• Wire Strippers*
• Crimpers*
• 16 Gauge wire (orange)*
• 15 amp rated switch*
• Ratchet extension (if needed)
• 3/4” Hose Plugs (x2)
• 13mm socket
• Small pry tool or flat head screwdriver
• 50/50 DEX-COOL antifreeze
* Usage is for installing the mannual overide switch only