Ir-gt3b manual-04 – Imaxrc IR-GT3B User Manual
Page 4

BATTERY CHARGING NOTES
If you transmitter, receiver using a nickel –cadmium, nickel-metal
hydride rechargeable battery, you have to well –check before you
use. If lack of electricity, it could happen those phenomenon like
inadequate control or out of control, resulting accident. So please
charge immediately when the battery lacks of electricity.
ݠ౧০ᄊԧ࠱ἻଌஆΎၹᄊ௧ἻඪԻЍႃႃ̀ἻښΎၹҒឰ০Ҭॹ
ೝಊႃႃ᧚Ǎݠ౧ႃ᧚ˀᡜἻԻᑟᒱ҄ᡰሏˀܵੋᏨܿᄊဘ៶Ἳ̰᭧̗
ၷਓܱǍਫ਼̿ႃႃ᧚ˀᡜឰԣЍႃǍ
If you are using a nickel-cadmium, nickel-metal hydride batteries
for recharging, please use our company dedicated charger. If the
electrical current is too large and it may lead to temperature
over-heated and cause fire burning accident. Please cut off the
power supply immediately after recharging. Please take out the
battery from the transmitter when you are not using it within a
period, it is because the battery may damage the aircraft batteries,
thus being exposed.
ݠ౧০Ύၹᄊ௧ἻඪႃᤉᛡЍႃἻឰ০Ύၹੈ̓НՃᄊ˄ၹЍႃ٨Ǎڂ
˞ݠ౧ЍႃႃืܸܺԻᑟᒱႃພएܺᰴἻ̰Ꮻ྇དྷᡑ༢ࣜਓܱǍЍႃ߹ੇ
ឰ০ԁѭலႃູǍे০᫂ᫎˀΎၹឰ০ંႃ̰ԧ࠱˗ԩѣἻڂ˞ႃ
Իᑟᒱԧ࠱ႃྟ૯ڮἻ̰ᏫଌᝏˀᓢǍ
The system works in between 2.40GHz to 2.4835GHZ
frequencies that have divided into 160 frequency points.
Each system uses 16 frequencies points and 160 hopping
frequency. By using various switching –on time, frequency
hopping and different frequency points ,the system can
passively avoid frequency avoid frequency jamming.
ܳᮠགᮠࢺͻὉ
"')%4 ᒭүᮠߚጇፒἻᤈ˔ጇፒ௧নሙНՃ˄˞വیྖݞᏨ
ᒭ˟ᆑԧἻࣳЦదᒭ˟ᅼគ̗ిᄊʷݓߚጳጇፒǍ߲௧˄᫃᧫ࠫ
വیֶ̗ᏫᆑԧᄊἻ߲Цదᡔूᄊ˟ү֗ᜂүઈࣰᑟҧԣౝͰᄊΎၹ
ҪᏲ֗ౝᰴᄊଌஆ༧ஐएἻ௧ᄬҒ࣊᭧ʽతݞᄊጇፒ˨ʷǍጇፒፃ
ᆑԧ̡րౝቫˑಫᄊតԣࣲܳ࣊ڤᰎἻവیྖݞᏨ߹ЛԻஊॷ
Ύၹἰ
㈨㐌➦ᒮ喟
The system uses low power consumption components,
and the receiver chip is extremely sensitive; the system
uses interval signal transmission, thereby the transmis-
sion power, and increasing the operating. Comparatively
this system consumes only one tenth of the normal FM
system.
ͰҪᏲࢺͻὉ
ጇፒ߹Л᧔ၹᡔͰҪᏲ٨͈Ἳ˅ଌஆ᧔ၹᰴ༧ஐएᄊଌஆᔇྟἻࢺ
ͻ᧔ၹᫎᬦԧவरǍ̰ᏫᬌͰ̀ԧ࠱ҪဋἻࣳଢӤ̀Ύၹࢺͻ
ᫎǍጇፒΎၹҪᏲᄱे̆̿Ғ'.ྠవᄊӡѬ˨ʷǍ
The system uses a linear spread of line paragraph by
excess antenna, which covers the entire band width of the
antenna bandwidth range, greatly enhances the efficiency
of the system launch and receiving sensitivity. It greatly
improves system stability, and strengthen the passive
anti-jamming capability of the system.
ЛᝈएܙᄞܹጳὉ
ጇፒ᧔ၹᄊ௧ጳভ͖ᓢᄊЛฉᄊܙᄞܹጳἻܹጳࣜࠕᄦட˔ฉ
ࠕएἻԻܸܸଢӤጇፒԧ࠱ဋԣଌஆᄊ༧ஐएἻ̰᭧ଢӤጇፒᄊ
ሷࠀভἻࣳҫू̀ᒭᢶᜂүઈࣰᑟҧǍ
2.4 Ghz System
04
Battery Charging Notes
05
Each transmitter has its own unique ID. When the
transmitter communicates with the receiver, the ID will be
transmitter and saved in the receiver. The system works
only when the ID is matched when the receiver powers on
.This dramatically increases the ability of passive
anti-jamming and enhances the total stability of the
system.
࿘ቡᢶ͋គѿጇፒὉ
ጇፒඈ˔ԧ࠱ᦐЦదʷᄊᢶ͋គѿ*%ᆊἻेˁଌஆᤉᛡࠫᆊ
Ց*%ᆊᜂߛஊښଌஆЯἻेଌஆࢺͻᯫЏ͘ᰎ*%ᆊ௧ա
ᆸἻཀྵՑ੦ࢺͻἻաѷˀ͘ࢺͻǍᮊԻҫܸጇፒᄊ˟үઈࣰᑟ
ҧἻ̰ᏫଢӤጇፒᄊሷࠀভǍ