Vacuum system, Mv800 operator’s manual – Ditch Witch MV800 User Manual
Page 76
MV800 Operator’s
Manual
Service - 75
50 Hour
CMW
®
Vacuum System
Change Engine Oil and Filter
(Initial Service)
Change engine oil and filter after 50 hours, and
every 100 hours thereafter. Drain oil (4), change
filter (3), and add 2.5 qt (2.3 L) of GEO at fill (2).
Change Fuel Filter (Initial)
Replace filter after the first 50 hours of operation,
and every 100 hours thereafter.
1.
Remove filter.
2.
Install new filter. Apply fuel oil thinly over the
gasket and hand-tighten.
IMPORTANT: Use oil specified in temperature
chart found in “Recommended Lubricants/
Service Key” on page 62.
See also other documents in the category Ditch Witch Special machinery:
- JT5 (161 pages)
- JT922 (159 pages)
- JT9 (165 pages)
- JT20 (195 pages)
- JT1220 (201 pages)
- JT2020 (203 pages)
- JT25 (203 pages)
- JT30 (245 pages)
- JT60 (218 pages)
- JT100 (243 pages)
- AT Air Hammer (11 pages)
- TK Series Manual (61 pages)
- 8500 (77 pages)
- MR90 (121 pages)
- FT5 (28 pages)
- FM5 (57 pages)
- FM13V (46 pages)
- FM25 (67 pages)
- P80 (71 pages)
- OnGrade (63 pages)
- FX20 (100 pages)
- FX25 (119 pages)
- FX30 (149 pages)
- FX50 (141 pages)
- FX60 (157 pages)
- RT Line (115 pages)
- RT30 (97 pages)
- RT45 (203 pages)
- RT55 (177 pages)
- RT100 (161 pages)
- RT115 (252 pages)
- RT120 (223 pages)
- Zahn (105 pages)
- RT80 (203 pages)
- RT115 Q (193 pages)
- RT120 Q (211 pages)
- 100SX (50 pages)
- 410SX (131 pages)
- SK350 (77 pages)
- SK750/SK755 (81 pages)
- SK850 (107 pages)
- SK850 Footings Machine (107 pages)
- 150RT (55 pages)
- 250RT (49 pages)