DaySequerra Mono2Stereo - Manual (Page 11)

M2S
User
Manual
11
Home
Screen
Figure 2. Home Screen on Mono2Stereo.
Mono2Stereo has been designed with ease of use in mind. Most of the common settings are available
for modification right on the home screen. While the unit is at this screen, press the HOME key to
invoke home screen selection mode; a selection box will appear. Turn the rotary encoder to move the
box to the desired field to be changed and press the ENTER key to modify the value. Rotating the
encoder again will cycle through the available options. Press ENTER again to confirm selection, or
BACK to revert the setting to the last saved value. Pressing the HOME or BACK keys exits home
screen selection mode.
1. Channel Selection: As all elements on the home screen are linked to a channel (except for
items 3, 5 and 6), the desired channel will need to be selected before other changes are made
2. Preset Selection: Audio processing on Mono2Stereo is defined by “preset” profile that consists
of several settings. Mono2Stereo will apply the preset chosen here towards the selected
channel.
3. Edit Preset Icon: Will display the configuration menu for the preset selected in field 2.
4. Channel Config Icon: Will display the configuration menu for the channel selected in field 1.
5. Clock Source: Will display the port that Mono2Stereo is using for AES Reference timing. This
will be represented as a port number, internal or external.
6. Sample Rate: Shows the sample rate Mono2Stereo has detected from the clock source. When
field 6 is set to INTERNAL, this field may be modified to the desired rate. (1/2, 3/4, 5/6, INT or
EXT SYNC).
7. Input Source: The physical input of the audio is defined here. AES or Analog (ANA) Left or
Right channels may be chosen. For more details on input choices, see advanced routing.