Ambir ImageScan Pro 820i - Manual (Page 23)

23
If you have more than one scanner or other imaging devices installed on
your computer, you need to set this scanner as the default scanning source
before you acquire image data/scan using a TWAIN compliant program.
1. For Presto! PageManager 7.1, From the File menu, click Select Source…
2. In the window that opens, choose this scanner and then click the OK
button to set this scanner as the default scanning source.
Scan within NewSoft Presto! PageManager 7.1:
1. Click on the Windows Start button, point to All Programs > Presto!
PageManager 7.1 and then click Presto! PageManager 7.1 to launch
the PageManager program.
2. Within Presto! PageManager, click Tools > Scan Settings > uncheck
―Suppress TWAIN User Interface‖ > OK. Click File > Acquire Image Data.
3. In the TWAIN window that opens, select ADF (Front Side) as the Scan
Type if you want to scan single-sided documents, or select ADF (Duplex)
to scan double-sided documents.
4. Adjust the scanning settings. For ADF (Duplex) scan, you can tailor
settings individually for front and rear sides of the documents. Click
Front Side button to adjust the scanning settings of document front side
and then click Rear Side button to adjust the scanning settings of
document rear side.
You can enable the Merge Pages function only when you select ADF
(Duplex) as Scan type and Automatic Size as Page Size to output the
scan images of both front and rear sides in one image. After Merge
Pages is enabled, you can select Horizontally to generate both front
and rear image data horizontally in a joined image (the rear image will
be placed at the right side next to the front image), or make the
selection of Vertically to generate both front and rear image data
vertically in a joined image (the rear image will be placed below the
front image).
5. Load one page of the document and click the Preview button. The
scanned image should appear in the Preview Window. To define the
margins and crop out sections of the image you don’t want scanned,
use the mouse to click and drag the corners or sides of the scan area
borders. Adjust the scan settings again if the preview image doesn’t
satisfy your needs.
6. Load all pages of the document and click the Scan button.
7. When the scan finishes, click the Exit button to close the TWAIN window.
The scanned images are displayed in Presto! PageManager, and you
may perform the image editing tasks.