Altech UEC Integrated 22'' LED/LCD FHD TV - Manual (Page 12)

Available button functions on top of the LED TV
Press / to scan through channels in VAST mode
Press / to scan through channels in TV mode
Press / to increase/decrease the volume level
Press to launch the TV main menu screen
Press to select the input source
Press button to alternately switch the TV ON/Standby
Ensure that power is supplied to the TV.
Press the button to switch ON the TV. The front LED status indicator will change from RED to GREEN
to indicate that the TV is ON. The TV will always boot up in VAST mode everytime it is powered ON as shown
in the images below:
I PORTANT I TV VAST VAST
Once it finishes with the VAST boot up sequence, it will display the VAST channels if your TV is connected to
a VAST satellite dish and if the smartcard inserted is already activated to receive VAST channels. If it’s not
connected to a satellite dish, “E50-32 searching for signal” appears on-screen. This is normal and you can
still use all the other INPUT sources (DTV, AV, Component, HDMI1, HDMI2, PC and Media) and its functions
on your TV except VAST.
For assistance:
[email protected]
www.uec.com.au
Altech UEC, 2014 12